Subscribe via RSS Feed

Category: Water Damage Mold

What is Water Damage Mold Remediation?

What is Water Damage Mold Remediation?

[ 0 ] July 9, 2010

Water Damage Mold Remediation

Water damage mold remediation is the removal of mold caused by water damage. The process can cost you nothing or it can cost you a lot. It depends on the method of removal you decide to use. Read this article to learn more about mold remediation. You’ll also learn when you can do it on your own and when a professional service is recommended.

The Water Connection

Mold usually grows inside of homes because of water, humidity and condensation. The rooms most affected include the attic, bathroom, basement, wall interior and crawlspace. However, any room is at risk if the conditions are right. All mold needs is a nice damp and dark area to make itself at home.

Do You Need Help?

Mold isn’t always as scary as it seems. It looks frightening, but that’s usually the extent of the trouble.

A small amount of it in your shower or basement isn’t too serious. You can remove it on your own using a mixture of distilled vinegar and baking soda. Mix the ingredients to make a paste. Apply the paste to the problem areas, let it soak and then wipe it off. The mold should easily wash away. If it doesn’t, you can purchase a mold cleaner from a home improvement store.

Cleaning is only the first step in the process. You must also find the source of the problem. That means checking for leaks, places of condensation and humidity. It’s important to keep the area dry. Mold removal does nothing if the bad conditions still exist. You’ll just end up cleaning it away again in a few months.

What happens if you have a serious mold problem? What do you do if your basement looks like a horror film overrun with black slime? You call in a professional mold remediation service.

Is it Dangerous?

First of all, you’ll want to find out if the situation is toxic. It rarely occurs, but toxic black mold is dangerous. You’ll need more than vinegar and baking soda to get rid of it. Professionals should come in and check to make sure the situation isn’t toxic. You want to clean no matter what, but you might need to remove your family from the house.

If it is toxic, you shouldn’t try to remove it on your own. Leave it a professional team that has the proper training and equipment. Some people will say this is unnecessary in a small home. Usually, mold remediation is reserved for buildings such as schools or commercial spaces. However, a small home can have a big problem. If your problem is big, get the help you need.

It’s true that water damage mold remediation isn’t always necessary. That is at least, not in a home. Make sure you need the service before getting involved with anything. If you know the job is too big for you to handle, then ask for help. Otherwise, it’s probably a good idea to take care of the problem on your own.

Drywall Water Damage Mold Removal

Drywall Water Damage Mold Removal

[ 0 ] July 8, 2010

Drywall Water Damage Mold

Water can be a destructive force. It can drown people, ruin property and destroy land. People don’t fear it as much as they fear fire. However, water is a very destructive force of nature. It can really cause serious damage to a home. Even worse, water can lead to mold growth. Drywall water damage mold removal is just one possible expense you’ll pay following water damage.

What is Drywall?

Drywall is used to finish the inside of building walls. In fact, it replaced plaster as the material of choice for finishing walls. On the upside, builders were able to create interesting patterns and decorations into the plaster. On the downside, the plaster method required a great deal of careful planning and skill.

Drywall eventually became popular and plaster took a backseat. Other names for the material include sheetrock, plasterboard and gypsum. There are advantages of using this material instead of plaster. First of all, it’s much easier to install. Just about anyone can learn to finish a wall with drywall. It doesn’t take a lot of skill or planning. Plaster is nowhere near as simple to use.

Sometimes drywall has anti-mildew ingredients added so it won’t attract mold. This isn’t done to all drywall, however. Unfortunately, when it does get infected with mold or mildew it’s impossible to clean. The damaged area must be cut out, thrown away and replaced. Just make sure to check the entire area for more trouble spots. Clean it well before installing new drywall. After you do the procedure once, you never want to do it again.

It might be best to hire a professional to do the job. Unless you know exactly what you’re doing, you could possibly make things worse. If you’ve never performed a big home improvement project, this isn’t the one to start with.

Find the Root of the Problem

What caused the water damage mold in the first place? Was there a leak inside the wall? Is a leak in the roof allowing rain inside? Find out the cause of the damage. Failing to fix the original problem will simply lead to more damage to the wall. Do you want to keep paying to replace a portion of the wall?

If you can’t find the source of the water damage, hire a professional. A home improvement specialist or plumber can check your home for trouble spots. They should also be able to repair any leaks they discover. This may cost you a fair amount, but it’s worth your money to have the repairs done.

Drywall water damage mold is a pain. It completely ruins the material. Then you have to remove and replace the damaged area in order to ensure compete mold removal. This costs you time, money or both. If the damage is already done, there’s nothing to do but fix the problem. If you see signs of a leak, but no mold has grown take precautions to prevent it from happening. Find the source of the leak and repair it as soon as possible.

Page 1 of 41234