Subscribe via RSS Feed

Tag: "mold test kit"

get rid of mold

How to Get Rid of Mold in Your Home

[ 0 ] January 17, 2011

Get Rid of Mold

Are you constantly blowing your nose, even when you don’t have a cold? It’s possible that you’re having an allergic reaction to toxic mold hidden in your home. The problem can drive you crazy, especially if you don’t know what’s happening. Even if you’re not having an allergic reaction, the growth can make your home look a mess. You should learn how to get rid of mold because it really will benefit your health.

You can’t win when it comes to mold. In the winter, the air in your home may become dry and infested with spores. This can lead to all sorts of problems, including allergies and asthma. On the other hand, if the air in your home is too moist it can actually cause more mold to grow. The only solution is to clean your home of the nuisance. Your bathroom is the first place to search for the culprit. If mold is there, you’ll certainly see it. Prime spots include around the bathtub, in the shower stall and on the shower curtain.

You can try over the counter sprays for cleaning the bathroom mold. These cleansers normally have ingredients that help remove, and prevent, the growth of mold. If you don’t want to buy anything special, you have a less expensive alternative. Get a spray bottle and fill it with one part vinegar to two parts water. Spray the infected areas with the mixture. Let the mixture soak into the mold for a few minutes, and then wipe it away with a cloth or sponge. Tough stains might require a second application. Once the bathroom is clean, you can occasionally clean with the mixture to prevent more growth. You should also keep the bathroom as dry as possible.

In addition to the bathroom, you also can check the kitchen and basement for mold growth. Mold loves moisture. It can lurk in kitchen cabinets or kitchen drawers. Sometimes the mold might remain hidden. In that case, a mold test might be required to see if any spores are present in the home. You should probably have a mold test done if you smell mold or are having unexplained allergy problems. You can buy a mold test kit to use at home or contact a mold removal company to handle the mold problem for you.

If the test indicates a mold problem, you can determine what to do next. Your options include having a professional company locate and remove the mold. This might be best, depending on the severity of the problem. Another option is to locate and remove the mold on your own. You must understand that it might not be as simple as cleaning a bathroom. The problem could lurk inside a wall or be hidden in the ceiling. Use your best judgment when deciding how to approach the situation.

Ultimately, you have to decide how to get rid of mold in your home. It doesn’t matter if you do it yourself or hire a professional mold removal service. The important thing is to get the job done.

Mold Inspection – How To Inspect Your Home for Mold

[ 0 ] June 10, 2010

Mold Inspection

If you think that your home is infested with mold, you can perform an inspection to find out. A mold inspection is something you can do on your own if you choose. You can also hire a mold inspection company to come in and perform the job for you. Keep in mind that there are molds that are visible and there are those that are not visible to the naked eye.

There are two ways to inspect your home. You can look for mold and use a mold home testing kit to get it analyzed. Or just hire someone to do it for you. A mold test kit, which is available at most hardware or home improvement stores, is relatively easy to use.

There are different types of mold testing kits. The steps you take depend on the kit your purchase.

Some kits require the use of tape. Cut the transparent tape into three long pieces one at a time. Attach the tape to areas where you notice visible mold growth. It could be on ceilings, walls, floors, in attics or crawl spaces. Peel off the tape and attach to the inside of a small plastic ziplock storage bag. Submit the collect lift tape samples to a laboratory for analysis.

Some kits simply need to be in a room where mold is suspected. These kits usually come with a dish and a sticky strip. Put the kit in the middle of the room. Make sure that the sticky side is facing upward. Allow the air of the room to settle down on the open dish for an hour before you close and tape it shut. Write the exact mold test location on the top of the kit. Submit the test kit samples to the mold laboratory for quantification and analysis.

You can also perform a mold inspection in your home by using your sense of smell. Using a strong flashlight, you can inspect every area around your home for visible mold growth on floors, walls, ceiling, basement, attic and other areas in the house. Pay attention to areas that are damp and with less sunlight. Record your findings, and decide if mold removal is necessary.

If you think that you have mold spores in the air of your home, you can have the air tested. It’s probably best to let a professional test the air. You can find a home testing kit that allows you to test the air. However, the procedure is often delicate and best left to a professional company. If you do it yourself, follow the directions carefully.

You have to make a comparison of both the air inside and outside of your home. Use two airtight containers and open them. Leave one container outside and the other inside. Make sure that you mark them correctly. After an hour, close the lids of the containers and leave them. You can then send the jars to the laboratory to identify the molds.

Mold inspection doesn’t have to be difficult. At home testing kits make the procedure pretty easy. But if you can, let a professional handle it.

Page 1 of 212